Capacitive Discharge Spot Welders

1000ws Dual Pulse Capacitive Discharge Spot Welders

The 1000 Dual Pulse Industrial Capacitive Discharge Spot Welders provide a substantial amount of weld energy along with a fine range of power adjustment. The CD1000DPM2 provides up to 1000 watt-seconds of energy for thicker, more conductive, and highly-resistive materials. For applications that may require additional weld energy, the unit can be upgraded to provide up to additional 100ws of energy. Weld energy can be adjusted by increments of 10ws making it extremely versatile for a variety of applications.

As with Sunstone Engineering’s other dual pulse spot welders, the 1000 Watt Second spot welder produces clean, strong welds. Each pulse can be adjusted to control the amount of energy released, and can be turned on/off independently. Pulse one heats the weld area to eliminate surface contaminants and to seat the welding electrodes. Pulse two provides the energy to form the actual weld. Both pulses occur almost simultaneously with each weld initiation.

When combined with Sunstone’s new line of weld heads, the CD1000DPM2 can form strong, precise, and repeatable welds. Contact Us to learn more about this product.

1000ws Capacitive Discharge Spot Welder Features

  • Dual Pulse operation removes surface inconsistencies and contaminants
  • Single or Dual Pulse operation
  • Up to 120 welds/min
  • Intuitive user interface
  • Thermo-Protection Internal Monitoring
  • Weld-Ready Audible Beeps

Typical 1000ws Capacitive Discharge Spot Welder Applications

  • Aerospace Welding Applications
  • Automotive Welding Applications
  • Honeycomb Tacking
  • Cross wire welding
  • Copper, Aluminum, and Brass thin sheet and wire
  • Miscellaneous resistive applications

Technical Specifications

PDF Data Sheet

Spotwelding Consultants Inc.

4209 Industrial
Rowlett, Texas 75088

Toll Free: 888-255-6780
Phone: 972-475-0874
Fax: 972-475-5024