Equipment - Resistance Welding Controls

Entron Controls
EN1000 - Bench

Entron Controls, Inc.


EN1000 Series Bench Controls Multiple Schedule/Multiple Sequence Controls

Features
  • Up Slope and Down Slope
  • Quench/Temper
  • Pulsation Sequence
  • Multi-Weld Count/Multi-Current Select
  • Pre-Heat/Post-Heat
  • Seam Weld (Continuous and Intermittent)
  • 4 Cycle Modes
    • Non-Repeat
      Single Schedule upon initiation
    • Repeat
      Single Schedule repeated with pilot circuit held closed
    • Successive
      Upon each initiation, unique successive schedules are automatically selected Chained
      Multiple schedules can be linked to operate sequentially upon a single
      initation
Capabilities
  • Store up to 50 unique schedules
  • Four Cycle Modes can be programmed for complex welding schedules
  • Single valve output circuitry
  • Single contactor circuitry
    Process control outputs
  • Additional Standard Features:
    • External Schedule Select
    • Contactor Failed Detection
  • Control can be interfaced with external Programmable Logic Control (PLC); Advanced interfaces available

EN1000 | EN1000-Bench | EN1001 | EN1000-Casc | EN1000-Multi | EN1003 | EN1501 | EN2000 | EN2130 | EN2150


Entron Controls, do not weld without them!

Spotwelding Consultants Inc.

4209 Industrial
Rowlett, Texas 75088
Toll Free: 888-255-6780
Phone: 972-475-0874
Fax: 972-475-5024