1/2 Ton J Series

Download PDF

Small Chiller - Powerful Results

This compact indoor chiller features an air-cooled design with durable, maintenance free stainless cabinet and all non-ferrous components. Offering reliable control of process fluids from 50-80°F, most models need no special wiring; it is truly a plug and play design.

Features Included:

  • Air-cooled, closed loop
  • Brushed stainless steel cabinet
  • Digital temperature controller
  • Hermetic compressor
  • Manual fluid bypass
  • Bypass regulator valve
  • Discharge pressure gauge
  • Tank fluid level sight glass
  • Flush-mounted fill port
  • Wire connection panel
  • Heavy duty casters

UL 1995 certification | 18 month parts & labor warranty | 24/7 service & support

Premium Package:

(Available on 230V only)
  • Pressure relief bypass
  • Hot gas regulator
  • Motorized hot gas
  • Auto makeup
  • Flow switch
  • Float switch

Ship Loose Options:

  • Anti-back flow
  • Air filter
  • Fluid filter
  • Feet

1/2 Ton J Series Specifications

Small Chiller - Powerful Results

J Series 1/2 Ton
115/1/60 @50psi 230/1/60 @50psi
Cooling
Refrigerant R134a
Compressor type: Hermetic condensing unit
Condenser type: Fin and tube
Fluid Circuit
Cooling capacity (60Hz): 5500 Btu
Fluid temperature (outlet): 65* °F
Cooling medium: water or water 70%/glycol 30%
Flow rate:  4 gpm
Pump pressure:  50 psi
Tank:
Capacity: 5 gal
Material construction: Liner low density polyethylene
Type: Open to atmosphere
Fluid Connections (FNPT): 1/2 in
Wetted component material:  Non-ferrous polyethylene
Evaporator: Stainless steel copper brazed plate
Gauge: Pressure
Climatic Data
Site of installation:  Indoor -
Ambient conditions: 50-95 °F
Noise level:  65-68 dB(A)
Electrical Data
Voltage: 115 230 V
Phases: 1 1 ~
Frequency: 60 60 Hz
Control:
Voltage: 115 V
Phases: 1 ~
Frequency: 60 Hz
Certifications/Standards: UL1995
Full loaded amps:  17 9 amps
Disconnect fuse size:  20 15 amps
Fault alarm signal: Overtemp
Switch: None
Controller type: Carel IR33
Additional Data
Chiller dimensions (WxDxH): 21 1/4 x 21 3/4 x 28 1/2 (Casters Included) in
Finish:  430 Stainless Steel
Crated weight:  245 310 Lbs
Wet Weight:  290 345 Lbs
*This is the rated temperature. Temps can vary but will affect capacity - contact factory.

Spotwelding Consultants Inc.

4209 Industrial
Rowlett, Texas 75088

Toll Free: 888-255-6780
Phone: 972-475-0874
Fax: 972-475-5024