Equipment - Resistance Welding Controls

Entron Controls

Entron Controls, Inc.

Controls for Resistance Welding EN2150 Bench Controls without Valve

  • Spot Sequence
  • Dual Weld/Dual Current
  • LED Status Indicators
  • All Functions Displayed Simultaneously
  • Compact, Lightweight Air Cooled Cabinet
  • Available with both 150 and 300A Air Cooled Contactors
  • Optional Manual Current Adjust
  • Two Schedules
  • Weld Control Relays
  • End of Sequence Output
  • Dual Weld Programming
  • Easily Programmed
  • Programmable for ½ Cycle Operation and Polarity Reverse
    • ½ Cycle Positive Initiation
    • ½ Cycle Negative Initiation
  • Program Only the Functions Required


  • Simple to Program
    Using the familiar and intuitive EN2000 platform, push-buttons and a three-step procedure make easy work of programming any welding schedule.
  • Direct Reading Digital Data Display
  • Simplified Design
  • Direct Replacement for EN150
  • Two Year Warranty
    A two year warranty is offered on all ENTRON parts and assemblies. Expert phone support and application service are available at no cost.
  • Half Cycle Mode with Polarity Reverse
  • Dedicated Dual Schedule / Dual Sequence Controls
    Designed for use with single phase welding machines, robotic equipment, bench welders, tweezer welders, stitch welders, machines with small heads and special machines.
EN1000 | EN1000-Bench | EN1001 | EN1000-Casc | EN1000-Multi | EN1003 | EN1501 | EN2000 | EN2130 | EN2150

Entron Controls, do not weld without them!

Spotwelding Consultants Inc.

4209 Industrial
Rowlett, Texas 75088

Toll Free: 888-255-6780
Phone: 972-475-0874
Fax: 972-475-5024